Basics

How to read a tide chart

A tide chart is four columns that answer one question: how deep will the water be, and when. Here is how to read one, using NOAA's real predictions for Boston on November 6 and 7, 2026.

In short

  • Each line is a high (H) or low (L) tide: the time, and the height of the water at that moment.
  • Heights are measured from a reference level, usually MLLW. A negative number means the water drops below it.
  • The difference between a high and the next low is the range: how much the water moves.
  • Times are in the station's local time. The table does not include wind or pressure.

A real tide table

DateTime (EST)Height (ft)
Fri, Nov 6, 20262:24 AML0.6
8:44 AMH10.2
2:57 PML0.3
9:13 PMH9.6
Sat, Nov 7, 20263:13 AML0.6
9:29 AMH10.4
3:46 PML0.0
10:00 PMH9.6
Boston, MA, NOAA station 8443970. Predictions above MLLW, read from NOAA CO-OPS on November 21, 2026.

Reading it, step by step

  1. Check the station and its time zone. The table belongs to one gauge, here Boston Harbor. A beach 20 miles away can be an hour off. The times are local to the station: in November, Eastern Standard Time.
  2. Find the reference level. NOAA measures from MLLW, the average of the lower of the two daily low tides. "10.2 ft" means 10.2 feet above that level, not 10.2 feet of water. Our guide to MLLW explains it.
  3. Read highs and lows in pairs. Boston gets two of each a day, about 6 hours and 12 minutes apart. The water rises from 2:24 AM to 8:44 AM, then falls until 2:57 PM.
  4. Work out the range. From the 10.2 ft high to the 0.3 ft low the water drops 9.9 ft in a little over six hours. A big range means strong currents in channels and long walks on the flats.
  5. Notice the zero and the minus sign. On Saturday afternoon the low is 0.0 ft: right at MLLW. When the low goes below it, the table prints a minus. That is a minus tide.
  6. Read between the lines. The water does not move at a steady pace. It moves slowest around the high and the low and fastest in between. A tide chart drawn as a curve shows that; a table does not.

Table or curve?

The table gives four exact moments. The curve gives every minute in between, which is what you need for a question like "is there enough water at the ramp at 11 AM?". On NOAA's own site you can switch between the two. In Tidebook you drag your finger along the curve and read the height at any hour.

What the tide chart leaves out

A tide prediction is astronomy: the pull of the Moon and the Sun on the water at that place. It does not include wind, air pressure or river flow, and those push the real water above or below the prediction. On one October morning in Boston, NOAA's sensor read 8.8 ft while the table said 8.2 ft: 0.6 ft of difference, all weather.Seen in the app When the weather is strong, compare the prediction with what a sensor is measuring.

In the app

Tidebook shows the table and the curve together for any of 3,489 NOAA stations, calculated on the phone and in the station's own time zone. With Pro, it also puts the live sensor next to the prediction at 238 stations. See how the offline engine works.

  1. Sources
  2. NOAA CO-OPS, tide predictions for station 8443970, read November 21, 2026: tidesandcurrents.noaa.gov
  3. NOAA National Ocean Service, "Frequency of Tides: The Lunar Day": oceanservice.noaa.gov/education/tutorial_tides/tides05_lunarday.html
  4. NOAA CO-OPS, tidal datum definitions: tidesandcurrents.noaa.gov/datum_options.html

Carry the tide with you.

Free to download, no ads, no account. Pro is one payment, never a subscription.

Free on the App StoreApp Store

Free download · Pro is one payment of $19.99, with a 7-day free trial