Datums
What does MLLW mean?
MLLW stands for mean lower low water. It is the zero that U.S. tide tables and nautical charts measure from, and it explains why a chart can show a depth of 2 ft in a spot where you have 6 ft of water.
In short
- MLLW is the average height of the lower of the two daily low tides, over NOAA's 19-year National Tidal Datum Epoch (1983 to 2001).
- U.S. nautical charts print depths below MLLW and tide tables print heights above it. Water depth ≈ charted depth + tide height.
- In Boston, mean sea level sits 5.2 ft above MLLW and the average higher high tide (MHHW) 10.3 ft above it.
The definition
NOAA defines MLLW as "the average of the lower low water height of each tidal day observed over the National Tidal Datum Epoch". On most coasts there are two lows a day. Take the lower one each day, average 19 years of them, and you have MLLW. The epoch in use is 1983 to 2001; NOAA is computing a new one from 2002 to 2020 data, with new datums proposed for release in 2029.
The datums of one station
| Datum | What it is | Above MLLW |
|---|---|---|
| MHHW | Mean higher high water: average of the higher high each day | 10.27 ft |
| MHW | Mean high water: average of all highs | 9.82 ft |
| NAVD88 | The land survey datum used on elevation maps | 5.50 ft |
| MSL | Mean sea level | 5.20 ft |
| MLW | Mean low water: average of all lows | 0.33 ft |
| MLLW | Mean lower low water: the chart datum | 0.00 ft |
Why charts use the low one
A chart that measured depth from mean sea level would promise more water than you get at an ordinary low tide. Measuring from MLLW keeps the charted depth on the safe side most of the time: on most low tides, there is at least the charted depth. The exception is the minus tide, when the water drops below MLLW and the table prints a negative height.
Working out real depth
- Read the charted depth at the spot, for example 2.0 ft.
- Read the tide height for the time you will be there, for example 4.0 ft above MLLW.
- Add them: about 6.0 ft of water. If the tide is −1.0 ft, subtract: about 1.0 ft.
- Leave a margin: the prediction does not include wind or pressure.
When you see other datums
Flood maps and engineering drawings often use NAVD88. In Boston it sits 5.5 ft above MLLW, so the same water level is a much smaller number on a NAVD88 map. Always check which datum a height is measured from before you compare two numbers.
In the app
Tidebook measures from MLLW by default and, at reference stations that publish them, lets you switch datum in Settings. Its "Can I pass?" tool does the depth sum above for you: your draft, your margin and the charted depth.
- Sources
- NOAA CO-OPS, "Tidal datums" definitions: tidesandcurrents.noaa.gov/datum_options.html
- NOAA CO-OPS, datums for station 8443970, read November 21, 2026: api.tidesandcurrents.noaa.gov/mdapi/prod/webapi/stations/8443970/datums.json
- NOAA CO-OPS, "National Tidal Datum Epoch": tidesandcurrents.noaa.gov/datum-updates/ntde/